Nilai bertuhan dalam ilmu kejuruteraan: Sorotan ayat al-Quran serta penghayatannya berdasarkan Tafsīr Fī Zilāl al-Qur’ān karya Sayyid Quṭb (1906-1966)

Divine values in engineering science: Highlights of Quranic verses and its appreciation based on Tafsīr Fī Zilāl al-Qur’ān by Sayyid Quṭb (1906-1966)

Authors

DOI:

https://doi.org/10.53840/alirsyad.v8i1.368

Keywords:

Tafsīr Fī Zilāl al-Qur’ān, Engineering, Technology, Divine Values

Abstract

The Quran has been the main source of knowledge for all humankind throughout the ages. Engineering is one of the branches of knowledge that impacts technology development. There are verses in the Quran that explain this engineering science indirectly. The stories about engineering in the Quran can also provide valuable lessons for humans and serve as preparation for the afterlife. However, discussions about the Quranic verses concerning various branches in the engineering field and their influence on the lives of engineers still need to be completed in journals. Therefore, this study presents the verses and stories in the field of engineering as well as their effects on the divine values in the life of an engineer. Library research is used to achieve the objective by referring to the Quran and the book Tafsīr Fī Zilāl al-Qur’ān as primary references. Writings on general history, education, and engineering are also consulted to achieve the objective. This study finds that the Quranic verses significantly affect the divine values of individuals involved in this engineering field and positively impact the formation of morals as a Muslim. This effect is closely related to the appreciation of the Quranic verses and efforts to practice them daily. The Quran was revealed as a guide and provision for humans to worship Allah. This writing can also open the eyes of every Muslim to the expansive interpretation of the Quran and convince their hearts that the Quran is a miracle that does not contradict scientific theories.

Downloads

Download data is not yet available.

Author Biographies

Amni Haslinda Alpandi, Universiti Teknologi Mara (UiTM) Segamat, MALAYSIA

Amni Haslinda Alpandi, a master's student in Contemporary Islamic Studies at Universiti Teknologi Mara (UiTM) Kampus Segamat. Her research focus is on Da'wah and human development. Previously, she received her Bachelor of Engineering (Hons) in Petroleum Engineering from Universiti Teknologi PETRONAS (UTP) in 2017 and her Master of Philosophy in Petroleum Engineering from Universiti Teknologi Malaysia (UTM) in 2019. She has successfully passed her PhD VIVA-VOCE in Petroleum Engineering from UTP and is awaiting the letter from the Senate. Her research focus is in the areas of production engineering and flow assurance. She has published her papers in high-impact journals (Q1, Q2, SCOPUS, etc). She is also pursuing a second master's degree in Contemporary Islamic Studies to integrate Islamic knowledge with engineering. She has successfully presented her work at conferences and published a conference proceeding and a journal paper. She is interested in deepening this research area and making all the findings available to the public as one form of contribution to the Ummah. She can be contacted at amni.haslinda@gmail.com.

 

Nurul Badriyah Ali, Universiti Teknologi Mara (UiTM) Segamat, MALAYSIA

 

 

 

Angraini Ramli, Institut Agama Islam Negeri (IAIN) Langsa, Aceh, INDONESIA

 

 

 

References

Abdullah, A. B. (2007). Kerjaya dalam bidang kejuruteraan. Kuala Lumpur: PTS Professional.

Ardian, H. H. (2010). Pembuatan paduan CU-ZN-SN dengan metode Vacuum Arc Melting Furnace. [Tesis Sarjana, Universitas Indonesia, Indonesia]. Diperolehi daripada https://lib.ui.ac.id/abstrakpdf.jspdetail?id=20249462&lokasi=lokal.

Atkins, A. G., & Escudier, M. (2013). A dictionary of mechanical engineering. Oxford, UK: Oxford University Press.

Baharom, et al. (2005). Kamus Dewan Edisi Keempat. Kuala Lumpur: Dewan Bahasa dan Pustaka.

Bigeev, V. A., Nosov, S. K., & Sarychev, B. A. (2014). Development of the manufacture of armor steel in the Magnitogorsk Metallurgical Works. Russian Metallurgy (Metally), 2014(6), 471–473. https://doi.org/10.1134/S0036029514060044.

Chen, W. F., & Liew, J. R. (2002). The civil engineering handbook. Boca Raton, FL: Crc Press.

Davis, C. A. (1916). On the fossil algae of the petroleum-yielding shales of the Green River Formation of Colorado and Utah. Proceedings of the National Academy of Sciences, 2(3), 114-119. https://doi.org/10.1073/pnas.2.3.114.

Dragobetskii, V. V., Shapoval, A. A., & Zagoryanskii, V. G. (2015). Development of elements of personal protective equipment of new generation on the basis of layered metal compositions. Steel in Translation, 45(1), 33–37. https://doi.org/10.3103/S0967091215010064.

Fanchi, J. R., & Christiansen, R. L. (2016). Introduction to petroleum engineering., New Jersey, USA: John Wiley & Sons.

Gilbert, M. (2016). Plastics Materials: Introduction and Historical Development. In M. Gilbert (Ed.), Brydson’s Plastics Materials: Eighth Edition (pp. 1–18). Oxford, UK: Butterworth-Heinemann. https://doi.org/10.1016/B978-0-323-35824-8.00001-3.

Guan, J., Zhang, X., Jiang, Y., & Yan, Y. (2019). Insights into fabrication mechanism of pure copper thin wall components by selective infrared laser melting. Rapid Prototyping Journal, 25(8), 1388–1397. https://doi.org/10.1108/RPJ-06-2018-0143.

Hafshar, S. S. (2015). Potensi sistem tenaga suria dalam penjanaan tenaga elektrik dari perspektif Islam di Malaysia. Global Journal Al-Thaqafah, 5(2), 111–121. https://doi.org/10.7187/GJAT952015.05.02.

Hamzah, H. & Ahmad Zubir, H. (2020) Pemakanan dan implikasinya terhadap pembangunan insan: Satu analisis berdasarkan kitab Fi Zilal Al-Quran. Borneo Akademika, 3(2), 1-10. Diperolehi daripada https://ir.uitm.edu.my/id/eprint/35313

Holubčík, M., & Jandačka, J. (2018). The effect of moisture content of firewood on the energy efficiency of fireplace insert and emission production in the combustion process. Acta Facultatis Xylologiae, 60(2), 189–198. https://doi.org/10.17423/afx.2018.60.2.18.

Jalil, M. H., Mohd Nasir, S. N. F., Ismail, M. I., Othman, M. Y. H., & Teridi, M. A. M. (2020). Hubungan antara cahaya matahari dengan penggunaan sel suria generasi ke-3 menurut al-Quran. Sains Malaysiana, 49(12), 2963–2975. https://doi.org/10.17576/jsm-2020-4912-08.

Jasmi, K. A. (2018). Bukti kewujudan Allah SWT dan kebenaran al-Quran: Surah al-Baqarah (2: 21-25). Siri 4. Siri Buku Tafsir Sempena Budaya al-Quran. UTM: Akademi Tamadun Islam.

Laplante, P. A. (2018). Comprehensive dictionary of electrical engineering. United Kingdom: CRC Press.

Muad, A. M., & Zabidin, M. A. R. (2022). Istilah kejuruteraan daripada al-Quran: Pemprosesan isyarat. Majalah Sains, 1, 1–10. Diperolehi daripada https://www.majalahsains.com/istilah-kejuruteraan-daripada-al-quran-pemprosesan-isyarat/.

Nor Muhamad, N. H., Abu@Husain, F. Tonggak, B., Aminudin, N. I., Abdul Ghani, F. (2015). Kejuruteraan genetik menurut perspektif Islam. Jurnal Sains Humanika, 4(2), 53-58. http://dx.doi.org/10.11113/sh.v4n2.563.

Othman, M. Y. (2020). Kesepaduan ilmu pengetahuan sains dalam sistem ilmu wahyu. Journal of Personalized Learning, 3(1) 2020, 1-13. Diperolehi daripada https://spaj.ukm.my/jplearning/index.php/jplearning/article/view/116/81.

Quṭb, S. (2010). Tafsir Fi Zilal al-Quran: Di Bawah Bayangan Al-Quran. Dato' Yusoff Zaky Haji Yacob (Ptrj.). Kuala Lumpur: Pustaka Darul Iman Sdn. Bhd.

Radzi, C. W. J. W. M., & Bakar, O. (1996). Teknologi menurut perspektif Barat dan Islam. Jurnal Usuluddin, 3, 147-155. Diperolehi daripada https://ejournal.um.edu.my/index.php/JUD/article/view/2988.

Richter, F., & Rein, G. (2020). A multiscale model of wood pyrolysis in fire to study the roles of chemistry and heat transfer at the mesoscale. Combustion and Flame, 216, 316–325. https://doi.org/10.1016/j.combustflame.2020.02.029.

Shokri, S. S. M., Salihan, S., & Abd Hamid, M. H. (2021). Inovasi digital dalam pengajaran & pembelajaran program Tahfiz di Universiti Tenaga Nasional (UNITEN). al-Irsyad: Journal of Islamic and Contemporary Issues, 6(1), 495-507. https://doi.org/10.53840/alirsyad.v6i1.137.

Syarboini, S. (2020). Ibrah dibalik kisah perjalanan Zulkarnain dalam al-Quran. Al-Mabhats Jurnal Penelitian Sosial Agama, 5(1), 105–30. https://doi.org/10.47766/almabhats.v6i2.

Tissot, B. P., & Welte, D. H. (1978). Geochemical fossils and their significance in petroleum formation. In Petroleum Formation and Occurrence (pp. 92–122). Springer Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-96446-6_8.

Wang, M., Li, S., Zhu, R., Zhang, R., Zu, L., Wang, Y., & Bao, X. (2020). On-Road tailpipe emission characteristics and ozone formation potentials of vocs from gasoline, diesel and liquefied petroleum gas fueled vehicles. Atmospheric Environment, 223(January), 117294. https://doi.org/10.1016/j.atmosenv.2020.117294.

Widayana, G. (2012). Pemanfaatan energi surya. JPTK, UNDIKSHA, 9(1), 37–46. https://doi.org/10.23887/jptk-undiksha.v9i1.2876.

Yakob, M. A. (2002). Terjemahan Tafsir Fi Zilal Al-Quran oleh Yusoff Zaky Yacob: Suatu kajian dari aspek metodologi. Kuala Lumpur: Penerbit UM.

Published

2023-06-29

How to Cite

Alpandi, A. H., Ali, N. B., & Ramli, A. (2023). Nilai bertuhan dalam ilmu kejuruteraan: Sorotan ayat al-Quran serta penghayatannya berdasarkan Tafsīr Fī Zilāl al-Qur’ān karya Sayyid Quṭb (1906-1966): Divine values in engineering science: Highlights of Quranic verses and its appreciation based on Tafsīr Fī Zilāl al-Qur’ān by Sayyid Quṭb (1906-1966). Al-Irsyad: Journal of Islamic and Contemporary Issues, 8(1), 1096–1106. https://doi.org/10.53840/alirsyad.v8i1.368